ScanGauge-D engine monitor for heavy diesel trucks showing temps, pressure, battery and fuel economy

SCANGAUGE-D OVERVIEW

Know What Your Truck Is Doing — In Real Time

Main features:

  • Compatible with both J1939 & J1708 protocols
  • 15+ live digital gauges — display 4 simultaneously
  • X-Gauge™ programmable gauges
  • 5 trip computers — distance, fuel, cost, speed and more
  • Performance Monitor
  • Real-time fuel economy — L/100km, cost per km, litres per hour
  • Heavy diesel fault code reader — read and clear codes

Compatible with most heavy diesel trucks, buses, agricultural and earthmoving equipment using J1939 and J1708 protocols. These vehicles have a round 6-pin or 9-pin diagnostic port. Not sure? Contact us to check compatibility with your vehicle or fleet. Check heavy diesel compatibility →

MONITOR ALL VITALS

Six tools. One device. Plug & play.

With the ScanGauge-D, you can monitor the most vital systems of your heavy diesel vehicle and get the real-time information you've been missing. Features include more than 15 built-in digital gauges, 5 trip computers and an easy-to-use scan tool that shows trouble codes — all in a compact design that installs in minutes.

ScanGauge-D for heavy diesel trucks, buses and commercial vehicles

15+ Live Engine Gauges

Display 4 simultaneously — coolant temp, oil pressure, RPM, boost, fuel economy, battery voltage and more. Fully customisable layout.

X-Gauge™ Programmable Gauges

Go beyond the standard gauges — add transmission temp, EGT, DPF soot load and other vehicle-specific parameters tailored to your truck.

5 Trip Computers

Track fuel cost, distance, average speed, litres used and range-to-empty across five independent logs. Data retained even when unplugged.

Heavy Diesel Fault Code Reader

See active fault codes the moment a warning light comes on — on the highway, on site or in the paddock. Know whether it's safe to keep going before you call for help.

Performance Monitor

Measure acceleration and braking performance. Save and recall runs to compare results over time.

Real-Time Fuel Economy

Instant L/100km, average economy, cost per kilometre, litres per hour and trip fuel cost. See exactly where your fuel money goes.


ScanGauge-D live engine gauges on a heavy diesel truck

LIVE ENGINE GAUGES

Monitor engine vitals and every reading your truck can share

More than 15 built-in digital gauges — select any four to display simultaneously. All data is pulled live from your vehicle's ECU as you drive. Switch between metric and imperial — km, litres, Celsius and kPa all supported.

Code Gauge Code Gauge
LHK / KPL Litres per 100km / Km per Litre CWT Coolant Temperature
AVG Average Fuel Economy OIL Oil Pressure
LPH Litres Per Hour TFT Transmission Fluid Temperature
TFC Trip Fuel Cost BST Boost
CPM Cost Per Kilometre RPM Engine RPM
KPH Speed (km/h) LOD Engine Load
VLT Battery Voltage TPS Throttle Position
FIA / CIA Intake Air Temperature HP Horsepower

* Available parameters vary by vehicle make and model. If a parameter is not supported by your vehicle's ECU, no data will be shown for that gauge.


X-GAUGE™ SYSTEM

Go beyond standard gauges — monitor what really matters for your rig

Discover available vehicle-specific gauges and expand the functionality of your ScanGauge with X-GAUGE™. The ScanGauge-D can record your vehicle's PID data. With the available PIDs, we can assemble a vehicle-specific X-Gauge list for you to expand what your ScanGauge can show.

X-Gauge vehicle-specific gauges read through the ECU, no hard-wired sensors needed

Popular X-Gauge parameters include:

Transmission fluid temp · Torque converter temp · Exhaust gas temp (EGT) · DPF soot load % · DPF differential pressure · Engine oil temp · Fuel rail pressure · Transfer case temp · and many more

Trans Fluid Temp Torque Converter Temp EGT DPF Soot Load % DPF Diff Pressure Engine Oil Temp Fuel Rail Pressure Transfer Case Temp

Browse all X-Gauge codes for your vehicle →


ScanGauge-D trip computers for heavy diesel trucks and equipment

TRIP COMPUTERS

Five trip computers — always logging, always ready

With five built-in trip computers, the ScanGauge keeps track of everything from fuel cost to distance travelled and everything in between. Data is stored on the ScanGauge and retained even when the power is disconnected. Each trip computer starts automatically and the information is available any time during the trip.

Time & Distance (×3 logs)
  • Current Trip, Today and Previous Day
  • Kilometres driven & hours driven
  • Fuel used and trip fuel cost
  • Average and max speed
  • Max RPM and max coolant temp
  • Fuel economy (L/100km)
Tank Computers (×2 logs)
  • Current Tank and Tank to Empty
  • Fuel used on current tank
  • Distance to empty
  • Hours to empty
  • Average economy for current tank
  • Total fuel cost for current tank

HD DIAGNOSTIC SCAN TOOL

Know what your engine is telling you — when it matters most

The ScanGauge-D checks for Diagnostic Trouble Codes (DTCs) and, if any are found, shows how many there are and the codes themselves. Using the internet or a repair manual, these can be traced to the failed component so repairs can be made.

Data captured when the code was set can be recalled to help troubleshoot the problem (was the engine hot or cold, speed high or low, etc.). The ScanGauge-D can then clear the codes and turn off the warning light.

ScanGauge-D heavy diesel scan tool reading and clearing fault codes

ScanGauge performance monitor measuring acceleration, braking and stopping time

PERFORMANCE MONITOR

Track performance. Prove the gains.

The ScanGauge-D features the exclusive Performance Monitor™ for real-time performance measurements over short periods of time, distance and acceleration.

Monitor various aspects of your vehicle's performance:

  • Measure 0–100 km/h acceleration
  • Measure braking performance
  • Save and recall performance runs
  • Monitor specific digital gauges
  • and much more…

INSTALLATION

Up and running in under five minutes — no tools required

Plugs directly into your truck's J1939 or J1708 diagnostic port and powers itself from it. No wiring, no calibration, no tools required.

ScanGauge plugs into a truck diagnostic port in minutes, no tools required

ScanGauge-D box contents: D unit, J1939 9-pin cable, J1708 6-pin adapter, user manual and Velcro mounting tape

IN THE BOX

What's included

• ScanGauge-D unit • J1939 9-pin cable • J1708 6-pin adapter • User manual • Velcro mounting tape

ScanGauge-D Key Features
Display
Backlit LCD with adjustable colour, 5-button operation
Gauges on screen
4 at once
Built-in gauges
15+ incl. oil pressure, intake temp and boost
X-Gauges
✔ Vehicle-specific list built from your truck's recorded data
Fault codes
Read & clear, with data captured when the code was set
Trip computers
5 (3 time & distance, 2 tank)
Performance Monitor
✔ Acceleration and braking
Compatibility
Heavy diesel from 1990 — J1939 (9-pin) & J1708 (6-pin)
Connection
J1939 9-pin cable + J1708 6-pin adapter — powered by the diagnostic port
Mounting
Velcro mount included
Units
Metric & imperial
Dimensions
12.19 × 3.8 × 2.55 cm
Warranty
3 years (Australia)
Australian firmware pre-installedMade in the USALocal Australian support

COMPATIBILITY

Will ScanGauge work on my truck?

ScanGauge heavy diesel models work with most trucks, buses, agricultural and earthmoving equipment from 1990 onwards that use the J1939 or J1708 diagnostic protocols.

Check your diagnostic port

Look under the dash for a round diagnostic connector:

  • 9-pin round port — J1939 (most trucks from the late 2000s onwards)
  • 6-pin round port — J1708 (mainly older trucks)

Both are supported.

J1939 9-pin and J1708 6-pin round diagnostic ports on heavy diesel trucks
Truck has a 16-pin port instead? Many medium trucks such as Isuzu and Hino use a 16-pin port — these work with the ScanGauge 3 and our 24V OBD extension cable. Some other trucks use a 16-pin connector for J1939 and need our 9-pin to 16-pin adapter instead. Not sure which you have? Contact us and we'll confirm before you buy.
✔ Works with
  • Heavy diesel trucks and prime movers
  • Buses and coaches
  • Agricultural machinery
  • Mining and earthmoving equipment
  • Diesel motorhomes using J1939/J1708
Common brands
  • Kenworth, Freightliner, Mack
  • Volvo, International, Navistar
  • Mercedes-Benz, Paccar
  • Cummins and Caterpillar engines

Driving a car, 4WD, ute or light commercial with a standard 16-pin OBD2 port? You'll need the ScanGauge 3 or ScanGauge 2 instead.

See the full heavy diesel compatibility list →

Not sure? Send us your truck's make, model & year

SKU SGDFFP
Barcode # 788006006133
Brand ScanGauge-D
Unit Of Measure ea

All truck repairs

By: on 9 November 2018
Ive fitted several of these units to customers trucks and they have worked out great. the real time data and fault code reading has been a winner
(5)

Write a product review

Others Also Bought

More From This Category